RT50_250_11_fmt
RT50_250_11_fmtRT50_250_13_fmt

Tube Furnaces with Stand for Horizontal or Vertical Operation

These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, and their compact design, also make these tube furnaces suitable for integration into existing process systems.

 

 

Category: .
  • Tmax 1100 °C, 1300 °C, or 1500 °C
  • Compact design
  • Vertical or horizontal operation freely adjustable
  • Working height freely adjustable
  • Working tube made of C 530 ceramic
  • Type S thermocouple
  • Operation also possible separate from stand if safety guidelines are observed
  • Control system integrated in furnace base
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

>

Model Tmax Outer dimensions in mm Inner tube Ø Heated Length constant Tube length Connected Electrical Weight
  °C W1 D H in mm length in mm temperature +/- 5 K in mm1 in mm loadkW connection* in kg
RT 50-250/11 1100 350 380 740 50 250 80 360 1.8 1-phase 25
RT 50-250/13 1300 350 380 740 50 250 80 360 1.8 1-phase 25
RT 30-200/15 1500 445 475 740 30 200 70 360 1.8 1-phase 45
Article No. Description
Exhaust systems/Accessories
631000140 Chimney for connection to an exhaust pipe
631000812 Chimney with fan, to remove exhaust gas from the furnace better.
631000166 Catalytic converter with fan for removal of organic components from the exhaust air.
699000408 Round saggar (Ø 115 mm x 35 mm) for furnaces LHT/LB, Tmax 1650 °C
699000984 Round lid for furnaces LHT/LB, Tmax 1650 °C
699000279 Square saggar for furnaces HTC and LHT, Tmax 1600 °C
699000985 Square lid for furnaces HTC and LHT, Tmax 1600 °C
493000002 Various tongs for easy loading and unloading of the furnace. (300mm)
493000003 Various tongs for easy loading and unloading of the furnace. (500mm)