K4_10_fmt
K4_10_fmtKC2_15_fmtKC2_15_mit_Bediener_fmt

Melting Furnaces

These compact melting furnaces for the melting of non-ferrous metals and alloys are one of a kind and have a number of technical advantages. Designed as tabletop models, they can be used for many laboratory applications. The practical counter balanced hinge with shock absorbers and the spout (not for KC) on the front of the furnace make exact dosing easy when pouring the melt. The melting furnaces are available for furnace chamber temperatures of 1000, 1300, or 1500 °C. This corresponds to melt temperatures of about 80 °C – 110 °C lower.

 

 

Category: .
  • Tmax 1000 °C, 1300 °C, or 1500 °C, with melt temperature about 80 °C – 110 °C lower
  • Crucible sizes of 0,75, 1,5 or 3 liters
  • Crucible with integrated pouring spout of iso-graphite included with delivery
  • Additional spout (not for KC), mounted at the furnace for exact pouring
  • Compact bench-top design, simple emptying of crucible by tiltiing system with gas damper
  • Crucible for heating up of melting furnace insulated with a hinged lid, lid opened when pouring
  • Defined application within the constraints of the operating instructions
  • Additional equipment
  • Other crucible types available, e.g. steel
  • Design as bale-out furnace without tilting device, e.g. for lead melting
  • Over-temperature limiter for the furnace chamber with automatic reset to protect against overtemperature. The limit controller switches off the heating when the pre-set limit temperature has been reached and does not switch it on again until the temperature falls below the setting again.
  • Observation hole for melt
Model Tmax Crucible Volume Outer dimensions in mm Connected Electrical Weight
  °C   in l W D H load kW connection* in kg
K 1/10 1000 A 6 0.75 520 680 660 3.0 1-phase 85
K 2/10 1000 A10 1.50 520 680 660 3.0 1-phase 90
K 4/10 1000 A25 3.00 570 755 705 3.6 1-phase 110
                   
K 1/132 1300 A 6 0.75 520 680 660 3.0 1-phase 120
K 2/132 1300 A10 1.50 520 680 660 3.0 1-phase 125
K 4/132 1300 A25 3.00 570 755 705 5.5 3-phase1 170
                   
KC 1/153 1500 A6 0.75 580 630 580 10.5 3-phase 170
KC 2/153 1500 A10 1.50 580 630 580 10.5 3-phase 170
Article No. Description
Exhaust systems/Accessories
631000140 Chimney for connection to an exhaust pipe
631000812 Chimney with fan, to remove exhaust gas from the furnace better.
631000166 Catalytic converter with fan for removal of organic components from the exhaust air.
699000408 Round saggar (Ø 115 mm x 35 mm) for furnaces LHT/LB, Tmax 1650 °C
699000984 Round lid for furnaces LHT/LB, Tmax 1650 °C
699000279 Square saggar for furnaces HTC and LHT, Tmax 1600 °C
699000985 Square lid for furnaces HTC and LHT, Tmax 1600 °C
493000002 Various tongs for easy loading and unloading of the furnace. (300mm)
493000003 Various tongs for easy loading and unloading of the furnace. (500mm)