LS25_13_fmt

Fast-Firing Furnaces

These fast-firing furnaces are ideal for simulation of typical fast-firing processes up to a maximum firing temperature of 1300 °C. The combination of high performance, low thermal mass and powerful cooling fans provides for cycle times from cold to cold up to 35 minutes with an opening temperature of approx. 300 °C.

 

 

Category: .
  • Tmax 1300 °C
  • Very compact design
  • Ceramic grid tubes as charge support
  • Floor and lid heating
  • Two-zone control, bottom and lid
  • Integrated cooling fans, programmable to speed up charge cooling including housing cooling
  • Programmable lid opening of approximately 20 mm for faster cooling without activating the fan
  • Thermocouple PtRh-Pt, type S for top and bottom zone
  • Castors for easy furnace moving
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
Model Tmax Inner dimensions in mm Volume Outer dimensions in mm Connected Electrical Weight
  °C w d h in l W D H load kW connection* in kg
LS 12/13 1300 350 350 40 12 600 800 985 15 3-phase 130
LS 25/13 1300 500 500 100 25 750 985 1150 22 3-phase 160
Article No. Description
Exhaust systems/Accessories
631000140 Chimney for connection to an exhaust pipe
631000812 Chimney with fan, to remove exhaust gas from the furnace better.
631000166 Catalytic converter with fan for removal of organic components from the exhaust air.
699000408 Round saggar (Ø 115 mm x 35 mm) for furnaces LHT/LB, Tmax 1650 °C
699000984 Round lid for furnaces LHT/LB, Tmax 1650 °C
699000279 Square saggar for furnaces HTC and LHT, Tmax 1600 °C
699000985 Square lid for furnaces HTC and LHT, Tmax 1600 °C
493000002 Various tongs for easy loading and unloading of the furnace. (300mm)
493000003 Various tongs for easy loading and unloading of the furnace. (500mm)